Rule LP900S LoPro 900 GPH Automatic Bilge Pump
The Rule LP900S LoPro 900 GPH Automatic Bilge Pump is a low profile pump with 900 gallons per hour capacity.
Designed for tight spaces, the height of the pump is only 2-1/4".
It features a threaded discharge nozzle to which you can attach either the included straight, or 90° fitting. Multiple ports are available for this pump. All ports are included:
- 3/4" Straight
- 3/4" Right angle
- 1" and 1-1/8"
It also includes a tricuspid check valve for the straight fitting which can be used to minimize the back flow of water.
The entire discharge body swivels up to 180° for ease of installation, and the hose can also swivel 360° for better routing.
The LoPro LP900S has (2) Automated settings, enabling the pump to turn on when the water reaches either 2" or 1.3"
- High or Low Water Sensing Mode: The pump starts when water reaches a 2" level By turning the motor cartridge upside down, the sensor is set at 1.3"
- Electronic Automatic Mode: The pump automatically turns on every 2.5 minutes to check for water, and if it's detected the pump stays on until the water is gone
- Voltage: 12 Volt DC
- Flow: 900 GPH open flow at 13.6 Volts
- Amp Draw: 4 Amp approx
- Protection: TCO
- Port Configuration: 3/4", 1", 1-1/8" Straight, 90 degree 3/4" (Backflow preventer valve can be used with straight fittings)
- Height: 2.3"
- Length: 9.3"
- Width: 2.3"